Skip to main content
Push switch

Part M Switches and Sockets

Since it’s introduction in 2004, Part M of the building regulations aims to make it easier for people with a disability to use and access buildings. You may have noticed that buildings now have ramps, wider doors, railings and more to allow easier access. Electrically, Part M is concerned with switches, sockets and other controls. The implementation of Part M will not only help people with disabilities, it can also aid the elderly, hard of hearing or visually impaired. Primarily, it’s focus is on commercial buildings with some slight differences between dwellings & non-dwellings.

Part M contrasting colours

Part M Socket
Part M socket with green contrast switches for use on a dark wall/background

Part M states that to aid visually impaired people, the colour of electrical accessories should contrast the wall so that they can be easily identified. On top of this, the actual switches on the faceplates should further contrast so they stand out. If you’re using all white switches and sockets on white or magnolia walls then you’re not compliant.

Rocker switch positioning

If you have a look at most standard double sockets, the two switches are often arranged next to each other in the middle of the socket. To people with limited dexterity or the visually impaired, it can be hard to differentiate between the two. Part M double sockets have the switches arranged at each side of the faceplate, aiding ease of use. These are known as ‘outboard rockers’.

Positioning on the wall

Part M outlines recommended outlet positions for items such as light switches, sockets, TV outlets and other controls such as thermostats. The exact end users should be taken into consideration for this, as wheelchair users would require lower light switch positions and possibly higher socket positions than other users.

Wide switches

Part M Light Switch
Wide switch for users with limited dexterity or visually impaired people
Rather than using normal sized light switches, to help visually impaired or users with limited dexterity, special wide switches can be fitted to make the job of turning lights on & off much easier.

Locating plug sockets

Locating plug sockets
Locating plug socket with V groove to allow easy location of the earth pin. Available in Part M dark grey with white switch, all white and in single and double configurations.

Some plug sockets are designed with a special V shape that allows the earth pin of the plug to be easily located & let down to the correct hole. If you’ve ever tried to plug an appliance in behind a piece of furniture you’ll know how difficult this can be – this is what visually impaired people go through on a daily basis. These sockets can also help people who suffer from hand tremors, or just for sockets that are going to be hidden behind wardrobes, racking, shelving or other large pieces of furniture that aren’t easily moveable.

Applications

All commercial or industrial buildings, with particular focus on public buildings and the healthcare sector.

Give us a call

For a free, non-obligation quote, get in touch to book an initial site survey.

0330 223 16 55

Lines are open during office hours, Mon-Fri 08:30-17:00. Out of hours, leave us a voicemail and we’ll get back to you, or email us here.

Find out more about Part M and your obligations by downloading the pdf documents from the Planning Portal here.

Hotel Key Card Switches

Hotel Key Card Switches

Improve energy saving in your hotel, B&B or guesthouse

Hotel Key Card switches improve energy saving by working as the main switch in a hotel room. They’re easily operated by the guests, with lights and electric heating only becoming operational when the guest enters the relevant card into the switch. This saves energy by stopping the room being necessarily lit, heated or cooled when it isn’t occupied. When the card is removed, the switch can be set to let the power stay on for a pre-defined amount of time (from 10 seconds to 5 minutes) .

Glow in the dark

The switches come with a small LED indicator, allowing guests to easily find the switch in the dark, so no additional lighting is needed to be fitted. The switches are designed to fit standard key card sizes of 85.60 mm × 53.98 mm, which is the same as a credit or debit card.

Switching ability

The switches are designed to switch up to a 6 amp inductive load or a 10 amp resistive load, meaning that they can be retro-fitted to nearly all rooms with ease. Larger loads such as air-con systems can also be controlled via the use of a contactor.

Looking the part

The switches come in a range of finishes, meaning that it won’t look out of place with your existing faceplates. Styles include white, chrome, stainless steel, brushed steel, polished brass, matt black, black nickel and more. With access to the full range of light switches, power and media sockets from the Click range, if you wanted to add these as part of a full refurbishment we can make sure everything matches perfectly.

How much will I save using hotel key card switches?

This really depends on your occupancy rate. The average hotel room has a 65% occupancy rate & of that, the guest is in the room for around 40% of the time. If you are currently heating, cooling, or lighting the room for the large periods of time nobody is in it, then you should see savings of more than the cost of installation.

Applications

Hotels, guesthouses, serviced apartments, bed & breakfasts, offices

Give us a call

For a free, non-obligation quote, get in touch to book an initial site survey.

0330 223 16 55

Lines are open during office hours, Mon-Fri 08:30-17:00. Out of hours, leave us a voicemail and we’ll get back to you, or email us here.

Get a Quote